TAQTRON - Public Safety Vehicle Router Triple 3G/LTE/CDMA2000 with Load Balancing, Link Bonding, Handover, Dead Reckoning GPS

TAQTRON - Multi-path 3G/LTE Load Balanced Public Safety Vehicle Handover Router

Public Safety Triple 3G/LTE Vehicle Router with GPS

The TAQTRON public safety in-vehicle router reliably connects a Mobile Unit to back-end systems over the Internet using up to three independent 3G, LTE or CDMA2000 EV-DO modems. All EDGE/3G/LTE or CDMA2000 uplinks are used in parallel with active and dynamic load balancing over all available networks. Network qualification and prioritization is based on a multi-parameter intelligent algorithm. An independent VPN tunnel to the gateway server is used on each uplink. If one uplink becomes unavailable or congested, traffic will be immediately routed to other VPN tunnels on available uplinks. The handover is immediate and transparent to the users guaranteeing an uninterrupted session.

Combining multiple 3G/LTE/CDMA2000 uplinks with load balancing is ideal for installations where variations in coverage are great and network throughput is limited or the application requires high capacity throughput. The bandwidth can be increased with three parallel connections, ensuring that network performance is optimal.

A 50-channel 3D G-sensor assisted GPS receiver is used to locate the vehicle, even in tunnels or urban canyon conditions where GPS signals are missing. Dead-reckoning navigation is performed by the GPS receiver using 3D accelerometers for postion, speed and altitude navigation. The position data may be sent to a defined IP address for fleet monitoring purposes. The vehicle class power supply is backed up with a UPS guaranteeing operation for 10 minutes.

Configuration and management of the TAQTRON router is performed remotely over any available wireless up-link using a secure authenticated session. Optional IDS/IPS softwares are available to the TAQTRON to address specific high network security and cyber-protection demands.

FEATURES:

Load balanced bandwidth optimization
Three EDGE/3G/LTE uplink connections
Parallel VPN on all WWAN uplinks
60s startup for internet connectivity
Accurate GPS for vehicle positioning
Dead Reckoning navigation with 3D accelerometers
802.11 b/g/n access point for in-vehicle WiFi
In-vehicle Gigabit Ethernet ports for:
- NVR systems
- Onboard Mission Systems
- IP Cameras
Optional IPS/IDS sofwares for cyber protection

SPECIFICATIONS

Wireless Uplinks	Three independent EDGE/3G/LTE or CDMA2000 EV-DO modems SMA antenna connectors
LAN Interfaces	2x 10/100/1000Mbit Ethernet - RJ-45 connectors 802.11 WiFi - 2x SMA connector
GPS	Inbuilt 50-channel GPS, uBLOX 6 3D Accelerometers for true dead reckoning SMA antenna connectors Interface to common GIS softwares Direct streaming to predefined IP address
IP Addressing	Fixed or Dynamic IP support DHCP NAT
VPN	Available on all EDGE/3G/LTE uplinks Dynamic load balancing between VPN tunnels Each uplink connects to Gateway Server with its own VPN
Firewall	Independently working on all interfaces
Firmware Management	Remotely or locally uploadable
Network management	Remotely using web browser interface Uses any active WWAN connection Access authentication
Temperature and humidity	Fully operating -20 to +55°C Operating humidity 5-95% non condensing Automatic system shutdown at +70°C
Power supply	Vehicle class 12/24VDc nominal 9 - 32VDc Input range UPS with 5-10 minute back-up
Power Consumption	10-12W typical, 20W while charging depleted UPS battery
Environmental protection	IP52 IEC529 standard configuration